logo logo

logo

News
Location：
Homepage
/
News
/
Company news

Why does the computer quilting machine always break the thread when quilting the quilt?

There are two reasons for this: 1, the line is too thin, resulting in easy to break the line, you can try to replace a thicker line. 2, the adjustment of the computer quilting head is not correct, and the head needs to be re-adjusted. Several methods of computer quilting head adjustment: 1, Install the machine needle: choose the appropriate machine needle, turn the sewing head wheel, so that the needle rod rises to the highest point, loosen the needle screw. Turn the long slot face of the machine needle to the left, insert the needle handle into the needle bar hole, and to the bottom of the needle bar hole, and then fix the screw. Note that in Figure 1, b, the needle handle is not inserted enough, and c, the direction of the needle slot is wrong.
23 2023-07-23
Why does the computer quilting machine always break the thread when quilting the quilt?

A fully automatic winding machine requires winding different coils

Automatic winding machine, ring winding machine, automatic winding machine, automatic winding machine winding mechanism working principle is basically the same as other series winding machine, worm wheel 2m2 drive, because the CAM 3 and worm wheel 2 coaxial connection, so they also rotate together, so that the short slide key in the keyway sliding, sliding direction depends on the CAM rotation position, CAM relative to the short slide contact surface rotation, If you rotate from a small radius to a large radius, the short slider slides in 5 directions, otherwise the short sliding CAM slides in the direction, and the sliding interval is equal to the difference between the maximum radius and the minimum radius of the CAM.
23 2023-07-23
A fully automatic winding machine requires winding different coils

Automatic winding machine three debugging methods

Automatic winding machine in use, every three months to carry out maintenance. In the maintenance process, we have to debug its winding situation, there are many ways to detect and debug, today we will say
23 2023-07-23
Automatic winding machine three debugging methods
Previous page
1

CONTACT

Add:1 Nanliu North Street, Qingxian County, Hebei Province    
Tel： +86-317-4161953    +86-317-4161018
Fax： +86-317-4161018 
Phone： +86-18733096188    
Contact person： Manager Xu    
P.C.：062650    
E-mail：czzhushi@czzhushi.com
Cangzhou Zhushi Textile Equipment Co., Ltd.

Mobile phone version

Cangzhou Zhushi Textile Equipment Co., Ltd. | Powered by www.300.cn | SEO | Business license
Verification 冀ICP备2022023645号-1