Enameled wire belongs to a variety of automatic winding machine winding wire, the inside is a conductor wire, the outside is wrapped by an insulating layer, after annealing and softening of the wire, through layer by layer of paint, and then after baking, the production must meet the specifications. Generally speaking, the enameled wire that meets the requirements is very resistant to pressure, and there is no problem with small bumps and scratches. However, some buyers say that the enamelled wire process is easy to break, for the following reasons:

1, different manufacturers, the quality of the production of enameled wire may be different, although they have basic performance, but after strength pulling and bending, there may be broken skin phenomenon, as far as possible to choose large brand enameled wire products, the performance is relatively more stable.

2. If the tension setting of the winding machine is too large, it may also cause the broken skin of the enamelled wire. The control of the tension must meet the specified requirements, and different enamelled wire materials are also different.

3. The design of the wire nozzle of the winding machine accessories is unreasonable, the process design of crossing the line and bending the line is not fine, especially when winding the thick line, it is easy to break the skin phenomenon.

4. The winding speed is too fast, which leads to the bending of the enameled wire too fast and the phenomenon of paint removal. It is necessary to set a reasonable speed for the enameled wire of different wire diameters.

5. The mold and skeleton design is unreasonable, the processing is rough, the polishing is not enough, there are burrs, etc., which may cause the wear of the enamel wire, leading to the phenomenon of broken skin.

6. Other situations such as foreign bodies in the wool felt, the position of the wire bucket is not well placed, and there are problems with the wire wheel, etc., may cause the broken skin of the enameled wire.

The automatic winding machine produced by the regular quilting machine manufacturer is basically not the above problems, if you encounter the above problems can be solved.