(Summary description)Quilting machine in the use of the process often appear some failures, some small failures do not need to return to the factory for investigation. Today, let Zhu's Master Li of flying shuttle to tell you the reasons and solutions for the failure of the following line break.
Cause: The on-line method is improper; Thread knotting; Excessive line tension; The needle is curved, blunt or has trachoma; Machine needle type does not fit; Needle placement is improper; Improper needle and thread matching; Too fast sewing speed; Threading without picker.
Solution: normal online again; Eliminate knot on line; Adjust the clamp pressure; Replace the machine needle; Replace the appropriate size of the needle; Properly set the needle; Change the thread or needle; Start sewing machine at medium speed; Check the online procedure.

The above is the quilting machine surface line break fault causes and solutions, if you use our Zhu's automatic winding machine or quilting machine when you encounter similar problems can refer to the above solution to lift.

• Categories:FAQ
• Author:
• Origin:
• Time of issue:2023-07-23
• Views:0